Global market industry sealing products PTFE gland packing
Basic Info
Model No.: PTFE Seal
Product Description
Graphite Gland Packing are almost suitable to all media, such as hot water, seam, acids, alkalis, organic solvents, hydrocar-bens and low temperature liquids. The sealing capability is more better and safety. It is the most effective composite parts for solving problems
pure PTFE braided packing: the packing is a pure PTFE fiber yarn packing braided into wquare cross section and impregnated with PTFE dispersion. It has high cross-sectional density and structural strength. It has low friction result in easy shaft running. Long lubricant squeezed out under operating pressure. It is used for universal application in centrifugal pumps, control valves and special applications in the chemical, foodstuffs and pharmaceutical industries
Kevlar fiber braided packing: it is made of DuPont's Kevlar yarn impregnated with PTFE dispersion and processed with lubricant. It is braided into square cross section. As the strength and module of Kevlar is as high as the steel-like strength. So, this packing can be compared with other kinds of braided packing. It can resist more serve media and higher pressure. It can be installed separately or as end rings with other kinds of packing to combine different characteristics into the packing set.
This packing is mainly used as substitute of asbestos in pump systems. Its property is better than asbestos and it covers all the services ranges which asbestos packing provides and more. It is used under very bad conditions where ordinary asbestos packing can not provide the satisfied effect. But this packing has long service. It is usually applied to the pulp factory, sand slurry tin mine and feed water pump of the power plant
asbestos packing impregnated PTFE: it is made of asbestos fiber cords impregnated with PTFE dispersion (addition of lubricant is optional). It is soft in texture and suitable as the sealing of pumps for liquidated chemical, However, packing impregnated with lubricants is recommended for use with reciprocating pumps or for the sealing in places where linear velocity is up to 10m/s
PTFE graphite braided packing: it is made from graphite-PTFE compound with lubricant. It has very good thermal conductivity. It has high flexibility and volumetric stability, no embitterment or ageing. It has universal resistance to chemicals with the exception of strongly oxidizing media such as fuming nitric acid and gaseous fluorine. It has an extremely wide range of uses in pumps (uncooled operation possible with hot water up to 160oC), agitators mixers and kneader centrifugal pumps, auto claves for all types of industry. It has long life with good operating efficiency
ramie braided packing: this packing is made of ramie fiber impregnated with PTFE plus lubricant. It is used for pumps, refiners, filters and valves in the brewing and beverage industry, ship-building and other fields. It is especially resistant to abrasive media in the paper industry and sea-water industry
carbon fiber braided packing: this product is a braided packing made of carbonized poly acrylonitrile fiber and finished with PTFE dispersion and lubricant. It has a wide range of application. It is relatively economical among non-asbestos packing. It is to seal water, brine, factory waste, salt solutions, weak acids and mineral oil. It is used for centrifugal pumps, mixers and agitators. Types:
Packing | Application range: All kinds of sealing material | |||
Name | Material | Temperture °C | Pressure Mpa | PH value |
Carbonized Fiber Gland Packing | Shrink-proof synthetic yarn with a special heatresistant, silicon-oil-free assitive. | 250 | 12 | 2-13 |
Flexible Graphite Gland Packing | Braided packing made of flexible pure graphite with structural textile fibres. | -200-850 | 25 | 0-14 |
Ptfe Packing with lubricating assitive. | 260 | 20 | 0-14 | |
PTFE packing with Graphite | PTFE filament yarn with permanently added PTFE graphite dispersion. The specially developed silicon-oil-free substance has excellent sliding characteristics and is incorporated in the packing by a special process | 260 | 10 | 2-13 |
Asbestos PTFE Packing | High-quality asbestos yarn with permanently added liquid PTFE and lubricating silicon oil. | 260 | 10 | 2-13 |
Aramid(Kevlar) Braided Packing | A high-quality, smooth, synthetic aramide endless fibres(Kevlar) with PTFE impregnation and lubricant additive. Extremely hard wearing. | -100-260 | 30 | 2-13 |
Remie gland Packing | Ramie fibre with light-coloured. Special PTFE impregnation or lubricating additive for prevention of product contamination. | -50-140 | 20 | 2-13 |
GFO gland Packing | PTFE filament yarn with permanently added QFO dispersion as lubrication additive | -200-280 | 10 | 0-14 |
PTFE with Kevlar gland Packing | A high-quality combination consistion of graphite-incorporated PTFE with sliding surface reinforcment made of aramide endless fibres(Kevlar) | -100-250 | 15 | 0-14 |
Cotton gland Packing | Pre-impregnated, twisted cotton yarns, intensively re-impregnated during braiding. | -20-100 | 6 |
Product Categories : PTFE Sealing > Expanded Tape
Premium Related Products